HOME

FLAT ALERT SYSTEM

ORDER NOW!

CONTACT US

 

  Did you know that tire problems are the #1 cause of  

   trailer accidents worldwide?    — source: USRider.org

 












Can you imagine anyone who tows a trailer with high-dollar horses, boats, or other valuable cargo not caring if they have a tire problem while driving down the road?

 


According to t
he North American Trailer Dealers Association, "The fact is that in 5 years, the average trailer owner will have 1-2 road hazards that require a repair or replacement to a tire and/or a wheel."

 

DON’T PUT YOUR SAFETY OR VALUABLE CARGO IN HARM'S WAY. THE SOLUTION IS SIMPLE. 
INSTALL A FLAT ALERT SYSTEM!
 

 

The Flat Alert System protects lives and saves precious cargo, and is by far the most practical and cost effective tire pressure alert system available for any trailer or towing vehicle.

 


Tire problems are inevitable if you tow a trailer on a regular basis. 
It’s not a matter of if it will happen, but when it will happen.


 




The wireless
radio frequency transmitters are automatically set
to send a signal to the receiver if the tire pressure drops 20% below the normal operating pressure.

A green light on the receiver shows that it is “listening” for a signal. A red light and beeper will activate when a signal is received from a transmitter up to 100 feet away (repeater antenna recommended if signal needs to reach further than 35 feet from rear tires on the trailer to the receiver).

Any towing vehicle with a Flat Alert System (FAS) receiver installed can hook on to any trailer with the FAS transmitters and it is INSTANTLY operational.

 

The Flat Alert System requires
NO PROGRAMMING

 


Or call us toll-free at 1.800.335.0758
to place your order by phone.




Click on the image above to see a video
about the Flat Alert System.
 

    

  • Wireless transmitters

  • Cost effective

  • Easy to install

  • No programming required

  • Hand-held pressure reader (no need for
    a tire gauge!

  • Saves lives, tires, and precious cargo

Click here to view Frequently Asked  

       Questions about the Flat Alert System.

 



 

Simple Installation:

  1. Replace the original valve stem on each tire with a FAS transmitter.
     

  2. Mount the FAS receiver on the dash of your vehicle using the Velcro pad.
     

  3. Plug the cord in to the power port of your vehicle and you are secure!

Click here for more detailed installation instructions.
 




The Flat Alert System comes with an
unconditional one-year guarantee
. Should a component fail within one year, it will be replaced
FREE OF CHARGE.

If you are not totally satisfied with the system's performance, simply return it for a refund.
No questions asked.
 


THE FLAT ALERT SYSTEM IS PROUDLY MADE IN THE USA BY




Celebrating over 15 years in business!

 

HOME     |     FLAT ALERT SYSTEM     |     ORDER NOW!     |     CONTACT US

Copyright 2009 DH Products, LLC.  All Rights Reserved.
Click here for our Legal Disclaimer and Privacy Policy.